Sizing is a calculation, not a guess based on floor area alone. This guide explains what actually goes into it, so you can ask better questions before you buy.
The factors that change the answer
A rough starting point for a well-shaded coastal apartment is around 100 to 150 watts of cooling capacity per square metre. That is a starting point only. A west-facing room with full-height glass can need substantially more.
- Floor area and ceiling height
- Glazing area, glass type and whether there is shading or blinds
- Orientation: a west-facing Sea Point room takes hard afternoon sun
- Occupancy and what the room is used for
- Heat from appliances, kitchens, servers or lighting
- Whether the room is top floor, under a roof, or shaded by the mountain
- How well the room is sealed and insulated
Why oversized is a real problem
An oversized unit reaches the set temperature quickly and switches off, so it never runs long enough to pull moisture out of the air. The room feels cold and clammy. It also cycles on and off more often, which is harder on the compressor.
In a humid coastal climate, the dehumidification side of the job matters as much as the temperature drop.
Airflow and position
Correct capacity with poor airflow still underperforms. Indoor units need a clear path for supply and return air, and ducts need to be sized and balanced so distant rooms get their share. A unit blowing straight onto a sofa feels cold and leaves the rest of the room warm.
What we do before quoting
We look at the room, the glazing, the orientation and the building constraints, then recommend a capacity and a system type that suit both. If the honest answer is that a smaller unit will do, that is what we will quote.
Questions about this
Can I size a unit from the room's square metres alone?
Only roughly. Area is a starting point, but glazing, orientation, ceiling height, occupancy and appliance heat can move the requirement significantly.
Is a bigger unit always better?
No. Oversized units short-cycle, dehumidify poorly and cost more to buy and run. Correct sizing gives better comfort.
Does a multi-split use less power than several single units?
It can, depending on how the rooms are used. If you rarely cool every room at once, a multi-split usually runs more efficiently than several separate systems.